High grade penetrating liquid helps restore structural integrity to damaged wood and fiberglass. Marine Tex Penetrating Epoxy is a two component , 2:1 ratio epoxy with very low solvent content (less than 5% solvent.)
Easy to use, all-in-one kit, just mix up and squeeze or brush out.
 

●    Saturates and reconditions wood and fiberglass surfaces, seals aluminum seams and rivets

●    Stops moisture penetration above and below the waterline

●    Seals hidden leaks and cracks in hulls, decks and bulkheads

WHERE TO USE: This liquid epoxy will initially soak thoroughly into cracks in gel coats, softened wood and aluminum seams and rivets.
Rotted Wood: Marine-Tex Penetrating Epoxy saturates rotted wood and restores its strength.
Cracks and Hidden Areas: Treating hair-line cracks in gel coats or blisters is best achieved by brushing or injecting Penetrating Epoxy into suspect areas with single or multiple coats.
Sealing: Marine-Tex Penetrating Epoxy will seal leaking floors, cabin roofs, seams, etc. when brushed onto a clean, dry surface.
 

Please Note:  Penetration is affected by moisture content, porosity of the material, and the ambient temperature.

Marine-Tex Penetrating Epoxy is available in 4 oz and 32 oz kits.
 

Directions & User/Application Tips            FAQ's            MSDS

Back to Product Page